SaskTel APN settings for Sharp Aquos S3
Sharp Aquos S3 is compatible with SaskTel HSDPA and SaskTel LTE.
To configure SaskTel APN settings with Sharp Aquos S3 follow below steps. Sharp Aquos S3 maximum data transter speed with SaskTel is 102/51 Mbps while Sharp Aquos S3 is capable of speeds up to 301.5/51 Mbps.
SaskTel Internet APN settings
In your Sharp Aquos S3 app drawer, go to Settings Connections Mobile networks Access Point Names
Add a new APN by pressing ADD on right top corner. If Sharp Aquos S3 has already set values for SaskTel 1 for any fields below leave them. Change others as below.
Name: SaskTel 1
APN: inet.stm.sk.ca
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 302
MNC: 780
Authentication type:
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart your Sharp Aquos S3 to apply SaskTel 1 APN settings.
SaskTel MMS APN settings
In your Sharp Aquos S3 app drawer, go to Settings Connections Mobile networks Access Point Names
Add a new APN by pressing ADD on right top corner. If Sharp Aquos S3 has already set values for SaskTel 3 for any fields below leave them. Change others as below.
Name: SaskTel 3
APN: proxy.stm.sk.ca
Proxy: mig.sasktel.com
Port: 80
Username:
Password:
Server:
MMSC: http://mms.sasktel.com
MMS proxy: mig.sasktel.com
MMS port:
MCC: 302
MNC: 780
Authentication type:
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart your Sharp Aquos S3 to apply SaskTel 3 APN settings.
SaskTel APN Settings
In your Sharp Aquos S3 app drawer, go to Settings Connections Mobile networks Access Point Names
Add a new APN by pressing ADD on right top corner. If Sharp Aquos S3 has already set values for SaskTel 2 for any fields below leave them. Change others as below.
Name: SaskTel 2
APN: pda.stm.sk.ca
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mms.sasktel.com/
MMS proxy: mig.sasktel.com
MMS port: 80
MCC: 302
MNC: 780
Authentication type: None
APN type: default,mms,supl,dun
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart your Sharp Aquos S3 to apply SaskTel 2 APN settings.
For Sharp Aquos S3, when you type SaskTel APN settings, make sure you enter APN settings in correct case. For example, if you are entering SaskTel Internet APN settings make sure you enter APN as inet.stm.sk.ca and not as INET.STM.SK.CA or Inet.stm.sk.ca. If entering SaskTel APN Settings above to your Sharp Aquos S3, APN should be entered as pda.stm.sk.ca and not as PDA.STM.SK.CA or Pda.stm.sk.ca.
SaskTel MCC-MNC values
Sharp Aquos S3 compatibility with SaskTel
Sharp Aquos S3 is compatible with below network frequencies of SaskTel.
3G | HSDPA | 850 MHz, 1900 MHz |
4G | LTE | Band 4 1700/2100 MHz |
Explain Sharp Aquos S3 compatibility with SaskTel
SaskTel 3G APN with Sharp Aquos S3
Sharp Aquos S3 supports SaskTel 3G on HSDPA 850 MHz and 1900 MHz.
SaskTel 4G LTE APN with Sharp Aquos S3
Sharp Aquos S3 supports SaskTel 4G on LTE Band 4 1700/2100 MHz.
Overall compatibililty of Sharp Aquos S3 with SaskTel is 100%. The compatibility of Sharp Aquos S3 with SaskTel, or the SaskTel network support on Sharp Aquos S3 we have explained here is only a technical specification match between Sharp Aquos S3 and SaskTel network. Even Sharp Aquos S3 is listed as compatible here, SaskTel network can still disallow (sometimes) Sharp Aquos S3 in their network using IMEI ranges. Therefore, this only explains if SaskTel allows Sharp Aquos S3 in their network, whether Sharp Aquos S3 will work properly or not, in which bands Sharp Aquos S3 will work on SaskTel and the network performance between SaskTel and Sharp Aquos S3. To check if Sharp Aquos S3 is really allowed in SaskTel network please contact SaskTel support. Do not use this website to decide to buy Sharp Aquos S3 to use on SaskTel.
Max download & upload speeds on SaskTel 4G for Sharp Aquos S3 per LTE band
| Band 4 1700 | 102 Mbps | 51 Mbps |
Sharp Aquos S3 network specifications
| OS | Android 8.0 (Oreo) |
| Network bands | GSM / CDMA / HSPA / LTE |
| Speed | HSPA 42.2/5.76 Mbps, LTE-A (2CA) Cat6 300/50 Mbps |
| Network frequencies | GSM 850 / 900 / 1800 / 1900 HSDPA 850 / 900 / 1900 / 2100 LTE band 1(2100), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 12(700), 17(700), 28(700), 34(2100), 38(2600), 39(1900), 40(2300), 41(2500) |
