Canada
HSDPA
LTE

Eastlink APN settings for Kyocera DuraForce Pro

      Eastlink   Kyocera DuraForce Pro   Android

Kyocera DuraForce Pro is compatible with Eastlink HSDPA and Eastlink LTE.

To configure Eastlink APN settings with Kyocera DuraForce Pro follow below steps. Kyocera DuraForce Pro maximum data transter speed with Eastlink is 102/51 Mbps while Kyocera DuraForce Pro is capable of speeds up to 301.5/51 Mbps.

Eastlink Internet APN settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Eastlink 1
APN: wisp.mobi.eastlink.ca
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 302
MNC: 270
Authentication type:
APN type: default
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

Eastlink MMS APN settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Eastlink 3
APN: mms.mobi.eastlink.ca
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmss.mobi.eastlink.ca
MMS proxy: 10.232.12.49
MMS port: 8080
MCC: 302
MNC: 270
Authentication type:
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

For Kyocera DuraForce Pro, when you type Eastlink APN settings, make sure you enter APN settings in correct case. For example, if you are entering Eastlink Internet APN settings make sure you enter APN as wisp.mobi.eastlink.ca and not as WISP.MOBI.EASTLINK.CA or Wisp.mobi.eastlink.ca. If entering Eastlink MMS APN settings above to your Kyocera DuraForce Pro, APN should be entered as mms.mobi.eastlink.ca and not as MMS.MOBI.EASTLINK.CA or Mms.mobi.eastlink.ca.

Eastlink MCC-MNC values

302-270

Kyocera DuraForce Pro compatibility with Eastlink

Kyocera DuraForce Pro is compatible with below network frequencies of Eastlink.

3G
HSDPA1700 MHz
4G
LTEBand 4 1700/2100 MHz

Explain Kyocera DuraForce Pro compatibility with Eastlink

Eastlink 3G APN with Kyocera DuraForce Pro

Kyocera DuraForce Pro supports Eastlink 3G on HSDPA 1700 MHz.

Eastlink 4G LTE APN with Kyocera DuraForce Pro

Kyocera DuraForce Pro supports Eastlink 4G on LTE Band 4 1700/2100 MHz.

Overall compatibililty of Kyocera DuraForce Pro with Eastlink is 100%. The compatibility of Kyocera DuraForce Pro with Eastlink, or the Eastlink network support on Kyocera DuraForce Pro we have explained here is only a technical specification match between Kyocera DuraForce Pro and Eastlink network. Even Kyocera DuraForce Pro is listed as compatible here, Eastlink network can still disallow (sometimes) Kyocera DuraForce Pro in their network using IMEI ranges. Therefore, this only explains if Eastlink allows Kyocera DuraForce Pro in their network, whether Kyocera DuraForce Pro will work properly or not, in which bands Kyocera DuraForce Pro will work on Eastlink and the network performance between Eastlink and Kyocera DuraForce Pro. To check if Kyocera DuraForce Pro is really allowed in Eastlink network please contact Eastlink support. Do not use this website to decide to buy Kyocera DuraForce Pro to use on Eastlink.

Max download & upload speeds on Eastlink 4G for Kyocera DuraForce Pro per LTE band

Band 4 1700 102 Mbps 51 Mbps

Kyocera DuraForce Pro network specifications

OS Android 6.0 (Marshmallow)
Network bands GSM / HSPA / LTE
Speed HSPA 42.2/5.76 Mbps, LTE-A (2CA) Cat6 300/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900
HSDPA 850 / 900 / 1700(AWS) / 1900 / 2100
LTE band 2(1900), 4(1700/2100), 5(850), 12(700), 25(1900), 26(850), 41(2500)
See full specs at GSM.COOL... Select a different device... Select a different network...
Kyocera DuraForce Pro 2 Eastlink APN settings
67% compatible with Eastlink
LTE