Canada
HSDPA
LTE
50%

Bell APN settings for Archos Diamond 2 Plus

      Bell   Archos Diamond 2 Plus   Android

Archos Diamond 2 Plus is not compatible with Bell HSDPA and compatible with Bell LTE 50%.

Archos Diamond 2 Plus does not appear to be fully compatible with Bell at this time. It will only support Bell 4G LTE only in certain areas of Canada. Please check the compatibility of Archos Diamond 2 Plus with Bell for more details.

To configure Bell APN settings with Archos Diamond 2 Plus follow below steps. Archos Diamond 2 Plus maximum data transter speed with Bell is 150.8/51 Mbps while Bell is capable of speeds up to 300/100 Mbps.

Bell Internet & MMS APN settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Bell 2
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
Username:
Password:
Server:
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
Authentication type:
APN type:
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

If the above Bell Internet & MMS APN settings do not work on your Diamond 2 Plus, make below changes to Bell Internet & MMS APN settings to get Bell Mobility on your Archos Diamond 2 Plus.

Proxyblank
Portblank
MMS proxyblank
MMS portblank
APN typedefault,mms,dun,supl
Authentication typeNone
MVNO typegid
MVNO value3D

For Archos Diamond 2 Plus, when you type Bell APN settings, make sure you enter APN settings in correct case. For example, if you are entering Bell Internet & MMS APN settings make sure you enter APN as pda.bell.ca and not as PDA.BELL.CA or Pda.bell.ca.

Bell MCC-MNC values

302-610

Archos Diamond 2 Plus compatibility with Bell

Archos Diamond 2 Plus is compatible with below network frequencies of Bell.

3G
HSDPA Not compatible
4G
LTEBand 7 2600 MHz*
*These frequencies of Bell may not have countrywide coverage for Archos Diamond 2 Plus.

Explain Archos Diamond 2 Plus compatibility with Bell

Bell 3G APN with Archos Diamond 2 Plus

Archos Diamond 2 Plus does not support Bell 3G.

Bell 4G LTE APN with Archos Diamond 2 Plus

Archos Diamond 2 Plus supports Bell 4G on LTE Band 7 2600 MHz only in some areas of Canada.

Overall compatibililty of Archos Diamond 2 Plus with Bell is 33%. The compatibility of Archos Diamond 2 Plus with Bell, or the Bell network support on Archos Diamond 2 Plus we have explained here is only a technical specification match between Archos Diamond 2 Plus and Bell network. Even Archos Diamond 2 Plus is listed as compatible here, Bell network can still disallow (sometimes) Archos Diamond 2 Plus in their network using IMEI ranges. Therefore, this only explains if Bell allows Archos Diamond 2 Plus in their network, whether Archos Diamond 2 Plus will work properly or not, in which bands Archos Diamond 2 Plus will work on Bell and the network performance between Bell and Archos Diamond 2 Plus. To check if Archos Diamond 2 Plus is really allowed in Bell network please contact Bell support. Do not use this website to decide to buy Archos Diamond 2 Plus to use on Bell.

Max download & upload speeds on Bell 4G for Archos Diamond 2 Plus per LTE band

Band 7 2600 150.8 Mbps 51 Mbps

Archos Diamond 2 Plus network specifications

OS Android 6.0 (Marshmallow)
Network bands GSM / HSPA / LTE
Speed HSPA 42.2/11.5 Mbps, LTE Cat4 150/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 900 / 2100
LTE band 1(2100), 3(1800), 7(2600), 20(800)
Select a different device... Select a different network...

Post reply

Name
Email
Device
Network